Tower crane sany 6013-8 2020 used

$

Main parameters:

Nominal lifting moment: 1320 kN m.

Maximum boom length: 60 meters.

Rotation speed: 0 - 0.7 rpm.

Self-height: Usually there are sizes such as 40.5 m, 45 m, 46 m, etc.

Standard section size: Usually it is 1.6 × 1.6 × 2.8 m or 1.8 × 1.8 × 2.8 m.



PDF Download

Advantages and Features
Technical Parameters

Comprehensive Features

High Performance:

The rated lifting capacity at the end of the long boom is 1.3 tons. The maximum lifting moment reaches 1320 kN・m. The maximum boom length is 60 meters. Seven combinations of boom lengths from 30 to 60 meters can be realized, which can meet different construction requirements.

For the segmented market of small precast concrete element lifting, the lifting capacity of the boom length of 30 to 40 meters is improved. The maximum lifting capacity at the end of the 35-meter boom is 3.25 tons, which meets the lifting requirements of small precast concrete elements.

Adopting new powder coating technology, which improves the surface finish and wear resistance by more than 30%.

High Safety: With ten tower crane safety protection and management technologies, it achieves three-dimensional protection and guarantees construction safety.

High intelligence:

Working conditions display technology can display twelve working conditions information, the monitoring is clear at a glance.

Intelligent fault diagnosis function can diagnose and alarm more than twenty alarms.

Adopting high-quality display integration, integrating 7-inch high-quality color display, controller and communication control module, convenient installation.

Low-voltage integration module is the first in the industry, integrating power supply, circuit breaker, relay, eddy current and other modules, at the same time optimizing the wiring harness, simplifying the wiring and reducing the volume of the control cabinet.

High use experience:

Good controllability. The three main mechanisms adopt full frequency control. Five-stage connection console control, good micro-motion, the speed varies according to the load, high efficiency of slow positioning in lifting micro-motion.

With one-click to place function, can one-click control the lifting, rotating and lowering to the designated place.

Humanized design, such as installing oil-proof gutter to prevent the oil from the rope from falling onto the ladder; adopting quick-assembly structure, shortening the installation and dismantling time; installing rotating tower structure, wider visibility for the operator; large space in the driver's cabin, 10% larger than its competitors, and also equipped with air conditioning, fan, cup holder, etc. as standard, greatly improving the comfort.


Basic information

Boom reach Башенные краны 6ез оголовка Device number
Brand name other Model sany 6018-3
Maximum load 8 tons Arrow length 60 meters
Load at the end of the boom 1.8 tons State Used
Mast Section Size 1.8*1.8*2.8 meters year 2020 г.
Free position 46 meters Maximum Height 230 meters
Work environment 正常 working time 2 г.

Crane Appearance Inspection

hook
Items to See characteristic Validation Item characteristic Validation Item characteristic
Counterweights Cargo trolley Lifting frame
Counterweight Barrier Lifting Hook Crane Base Mechanism
Platform with counterweights Auxiliary Lifting mechanism
arrow ballast Lifting and frame platform
Lifting mechanism Swivel body Lifting frame booms
Upper section of the tower Swivel mechanism Standard Section
Front boom Operator's Cab Base Node
Mechanism for changing the departure Distribution Box

Note: This inspection mainly determines whether the appearance of the tower crane is deformed or damaged, etc. It only reflects the appearance and does not affect the structure.

General design characteristics of a tower crane

Inspection items Characteristics Inspection items Characteristics Inspection items Characteristics
Construction of counterweights Upper section of the tower Pumping station
Front boom① Rotary mechanism Cargo trolley
Front boom② Operator cabin Lifting hook
Front boom③ Ballast Lifting mechanism
Front boom④ Lifting frame Mechanism for changing reach
Front boom⑤ Standard section Rotary mechanism
Front boom⑥ Amplification section Lifting device
Front boom⑦ Basic section

Note: This inspection determines the overall structural characteristics of the tower crane, as well as the presence of welds, deformations, corrosion, etc., affecting the stability of the entire structure.

Control cabinet inspection

Inspection items Characteristics Inspection items Characteristics Inspection items Characteristics
Main power switch Humidity temperature controller Circuit breaker with frequency conversion
Main contactor High and low voltage relay Frequency converter
Safety switch Phase rotation relay AC contactor
Intermediate relay Isolation transformer Emergency switch
Cabin power switch Power switch for electrical panel Programmable controller
Sound switch Voltmeter Limit relay

Note: This inspection determines the configuration and normal operation of electronic switch cabinet components.

Запасные части и аксессуары

Inspection items Characteristics Inspection items Characteristics Inspection items Characteristics
Counterweights Cargo trolley Lifting frame
Counterweight barriers Lifting hook Crane base mechanism
Platform with counterweights Auxiliary hook Lifting device
Crane boom Ballast Lifting frame platform
Lifting mechanism Rotary mechanism Lift frame guards
tower head rotating mechanism Standards section
Upper section of the tower Rotary mechanism Standard section
Front boom Operator cabin Basic section
Mechanism for changing the reach Distribution box

Note: This inspection checks the number of tower crane accessories, including but not limited to pins, platform railings, screws, etc.

Grand total

Checking structural characteristics Normal state
Appearance Traces of normal use
Checking electrical components Traces of normal use
Spare parts and accessories Integral
Conclusion Traces of normal use